Alto-Shaam SN-38110 Temperature Sensor Replacement, 100 Ohm, 110-Inch Wire, 12-Month Warranty

Restore dependable temperature monitoring in compatible commercial foodservice equipment with the Wholesale Sensors Replacement for Alto-Shaam SN-38110 Temperature Sensor.

Designed as an OEM-style aftermarket replacement, this 100 Ohm temperature sensor features a 110-inch wire lead and provides temperature feedback to compatible Alto-Shaam equipment control systems.

Accurate temperature sensing is important for maintaining consistent cooking and holding conditions. When an original sensor becomes damaged, disconnected, or electrically defective, equipment may experience inaccurate temperature readings, inconsistent heating, or sensor-related faults.

Replacing a confirmed defective sensor may help restore normal temperature feedback without replacing unrelated equipment components.

OEM Replacement and Cross-Reference Part Numbers

Primary OEM Replacement:

• Alto-Shaam SN-38110
• Alto-Shaam SN-38110 Temperature Sensor
• Alto-Shaam SN-38110 100 Ohm Sensor

These descriptions refer to the same primary OEM replacement number. Additional superseded or interchangeable part numbers should be verified through official Alto-Shaam parts documentation.

Product Specifications

Compatible Alto-Shaam Equipment

The Alto-Shaam SN-38110 replacement temperature sensor is intended for select Alto-Shaam commercial foodservice equipment requiring this specific original equipment component.

Potential applications include compatible:

• Alto-Shaam commercial cooking equipment
• Alto-Shaam heated holding equipment
• Alto-Shaam foodservice temperature control systems
• Alto-Shaam equipment requiring a 100 Ohm temperature sensor
• Alto-Shaam equipment configurations specifying SN-38110

Compatibility depends on the equipment’s complete model number, serial number, temperature control configuration, and original sensor specifications.

Before ordering, consult the manufacturer’s parts diagram or service manual to confirm the correct replacement number.

Compare the original sensor with the replacement to verify probe dimensions, wire length, resistance characteristics, and electrical connections.

Important: This temperature sensor is not universal across all Alto-Shaam equipment.

Shop our complete collection of commercial oven temperature sensors and replacement temperature probes for compatible foodservice equipment repairs.

100 Ohm Temperature Sensor Function

The Alto-Shaam SN-38110 temperature sensor provides temperature information to the equipment’s compatible control system.

The sensor’s electrical characteristics change in response to temperature, allowing the controller to interpret temperature conditions and regulate designated heating functions.

A properly functioning temperature sensor helps maintain consistent temperature feedback during cooking or holding operations.

When a sensor develops an electrical fault, the controller may receive inaccurate or interrupted temperature information.

Replacing a defective sensor may help restore the intended temperature monitoring function.

This component is a temperature sensor, not a heating element, thermostat assembly, electronic controller, or independent high-temperature safety device.

110-Inch Wire Lead and Sensor Construction

The Wholesale Sensors Alto-Shaam SN-38110 replacement features a 110-inch wire lead designed for compatible equipment installations.

The extended wiring length supports routing between the temperature sensing location and designated electrical connection points.

Important installation considerations include:

• Correct 100 Ohm sensor configuration
• Matching temperature sensing characteristics
• 110-inch wire lead length
• Proper probe positioning
• Secure electrical connections
• Appropriate cable routing
• Protection from excessive heat and abrasion
• Compatibility with the original equipment control system

Correct installation helps maintain dependable temperature feedback during commercial kitchen operation.

Specific probe materials, temperature ratings, connector types, and resistance-versus-temperature characteristics should be verified against the product’s engineering documentation.

Helps Resolve Common Alto-Shaam Temperature Problems

A damaged or defective temperature sensor may contribute to:

• Inaccurate temperature readings
• Equipment failing to reach the selected temperature
• Inconsistent heating performance
• Unexpected temperature fluctuations
• Open temperature sensor circuit faults
• Shorted temperature sensor circuit faults
• Intermittent sensor signals
• Temperature controller warnings
• Uneven heating caused by incorrect temperature feedback

Replacing the Alto-Shaam SN-38110 temperature sensor may help resolve these issues when the original probe is responsible.

Similar symptoms can result from defective controllers, heating elements, damaged wiring, or other equipment problems.

Proper diagnosis is recommended before replacing components.

Alto-Shaam Error Codes and Troubleshooting

Depending on the equipment model and installed controller, a defective temperature sensor may contribute to sensor-related warnings, open-probe indications, shorted-probe indications, or temperature control faults.

Exact diagnostic codes vary by equipment model and controller.

Commercial cooking equipment does not use standardized automotive OBD-II diagnostic trouble codes.

A temperature-related warning does not automatically confirm that the sensor requires replacement.

Consult the Alto-Shaam service manual for model-specific diagnostic procedures.

Installation and Replacement Instructions

Turn off the equipment and disconnect electrical power before servicing.

Allow heating components, cooking surfaces, and surrounding equipment to cool completely before beginning repairs.

Locate the original temperature sensor using the appropriate Alto-Shaam service documentation.

Record the existing probe position, wiring connections, and cable routing before removal.

Compare the replacement Alto-Shaam SN-38110 sensor with the original component.

Confirm the 100 Ohm sensor specification, 110-inch wire lead, and electrical connection requirements.

Remove the defective sensor according to the manufacturer’s instructions.

Install the replacement using the designated mounting location and electrical connections.

Route the wire according to the original equipment configuration, keeping it away from sharp edges, moving components, and temperatures exceeding its rated limits.

Restore equipment operation and verify temperature readings using the manufacturer’s recommended testing procedures.

Professional installation by a qualified commercial foodservice equipment technician is recommended.

Commercial Kitchen and Foodservice Applications

The Wholesale Sensors Alto-Shaam SN-38110 Temperature Sensor Replacement provides an aftermarket repair option for compatible commercial cooking and holding equipment.

Suitable for:

• Restaurants
• Commercial kitchens
• Catering operations
• Institutional foodservice facilities
• Commercial cooking equipment maintenance teams
• Restaurant equipment repair companies
• Professional foodservice technicians

Replacing a defective temperature sensor may help restore reliable temperature feedback without replacing unrelated equipment components.

12-Month Warranty and USA-Based Support

Wholesale Sensors supplies aftermarket temperature sensors, thermistors, wiring harnesses, and replacement components for commercial foodservice equipment.

The Alto-Shaam SN-38110 100 Ohm Temperature Sensor with 110-Inch Wire Lead includes a 12-month warranty and responsive USA-based customer support.

Choose Wholesale Sensors for compatible Alto-Shaam commercial equipment repairs and dependable replacement component support.