Frigidaire 316220722 Range Oven Overlay, Replacement with 12 Month Warranty & USA Business

Restore the appearance and usability of your compatible range control panel with the Wholesale Sensors Replacement Frigidaire 316220722 White Control Overlay Panel for Range, Stove, and Oven applications. Designed as a perfect OEM-style replacement, this 7-button control panel overlay is engineered to meet or exceed original fit and functional specifications while providing clearly marked controls and a clean finished appearance.

The control overlay is the visible faceplate installed over the electronic oven control area. It identifies the control buttons and functions while protecting the underlying control surface from normal kitchen use. Over time, the original overlay can become faded, scratched, stained, cracked, worn, or begin peeling away from the control panel. When the electronic control underneath is still functioning correctly, replacing only the overlay can provide a practical and economical alternative to replacing the complete control assembly.

Replacement for Frigidaire 316220722

The primary replacement number for this white control panel overlay is Frigidaire 316220722.

Sears PartsDirect confirms that 316220722 has been replaced by 316220728 and describes the component as an oven control overlay that covers and labels the selection buttons on the oven control board. Sears Parts Direct

Documented replacement and cross-reference numbers include:

316220722
316220728
316220700
316220704
316220707
316220711
316220718
316220726
318213800
318213812
318214400
318214407
318324804
4582943
AP6248310
PS12114508

These numbers are documented in appliance parts catalogs as replacement or interchange references associated with this overlay configuration. PartSimple

Because appliance manufacturers can make changes during production, always verify the complete model number and original overlay configuration before ordering.

Compatible Frigidaire and Related Range Brands

The 316220722 control overlay is used across a large number of Frigidaire-built ranges. Documented compatible brands include Frigidaire, Kenmore, Crosley, Tappan, Electrolux, Gibson, and White-Westinghouse. Sears Parts Direct

Popular documented Frigidaire and related models include:

FEF326ASA
FEF326ASB
FEF326ASC
FEF326ASD
FEF326ASE
FEF326ASF
FEF326ASG
FEF326ASH
FEF326ASK
FEF326ASM
FEF326FSA
FEF326FSB
FEF336ASB
FEF336ASC
FEF336ASD
FEF336ASE
FEF336ASF
FEF336ASG
FEF336ASH
FEF336ASJ
FEF336ASK
FEF336ASL
FEF339ESA
FEF339FSA
FEF339FSC
FGF326ASA
FGF326ASB
FGF326ASC
FGF326ASD
FGF326ASE
FGF326ASF
FGF326ASH
FGF326ASJ
FGF326FSA
FGF328FSA
FGF328FSB
FGF337ASA
FGF337ASB
FGF337ASC
FGF337ASE
FGF337ASF
FGF337ASJ
FED300DSB
FED300ESC

The overlay is also documented for numerous Kenmore 790-series ranges, including 790.617501, 790.617511, 790.617521, 790.617541, 790.701127, 790.703027, 790.711527, 790.711627, 790.712027, 790.712117, 790.712127, 790.713127, and 790.713227, among others. PartSimple

Compatibility is based on the exact appliance model and control configuration rather than a specific year range.

White 7-Button Control Overlay

This replacement is designed as a white and gray 7-button control board overlay. Appliance parts catalogs describe the 316220722 configuration as a plastic overlay with a glossy finish. One documented replacement measures approximately 6-1/2 inches long by 3-3/16 inches high. Speedy Appliance Parts

The printed surface identifies the corresponding oven functions so users can easily operate the underlying electronic controls.

A new overlay can dramatically improve the appearance of an older range when the original graphics have become difficult to read or the faceplate has become damaged through years of normal cooking and cleaning.

Important: Overlay Only

The 316220722 is the control overlay only. It is not the electronic oven control board, timer, relay board, or complete control panel assembly.

Sears specifically describes the component as the overlay that covers and labels the selection buttons on the oven control board. Sears Parts Direct

This distinction is important when diagnosing an appliance.

If the existing oven control operates correctly but the faceplate is peeling, faded, scratched, stained, or difficult to read, replacing the overlay may be all that is required.

However, if buttons do not respond, the display is blank, the oven will not heat, or the appliance is displaying an electronic fault, the problem may involve the electronic control board, wiring, power supply, temperature sensor, heating components, or another electrical part.

Replacing the cosmetic overlay will not repair a defective electronic control board.

Restores a Clean Control Panel Appearance

Kitchen appliances are regularly exposed to heat, steam, grease, cleaning products, and frequent button presses. These conditions can gradually deteriorate the printed control overlay.

Common reasons for replacing the 316220722 overlay include:

Faded or unreadable control labels
Peeling overlay material
Cracked or damaged faceplate
Grease or stains that cannot be removed
Worn button markings
Scratched control panel graphics
Cosmetic restoration of an older range

Installing a fresh replacement provides a clean, clearly labeled control surface without requiring replacement of a properly functioning electronic control board.

Straightforward Peel-and-Stick Installation

The replacement overlay uses an adhesive-backed installation design. Compatible aftermarket versions are documented as peel-and-stick overlays intended to mount directly over the control surface. Walmart.com

Before installation, disconnect electrical power to the range. Sears also specifically instructs users to unplug the range before installing this type of control overlay. Sears Parts Direct

Remove the existing overlay carefully and clean away old adhesive, grease, and residue from the mounting surface. The surface should be clean and dry before installing the new overlay.

Before exposing the adhesive, position the new overlay over the control panel to verify alignment with the display and buttons. Once alignment has been confirmed, remove the adhesive backing and carefully apply the overlay. Press evenly across the surface to create a secure bond.

Take time during alignment because repositioning an adhesive overlay after firmly pressing it into place can damage the adhesive or faceplate.

Verify the Model Before Ordering

Frigidaire and its affiliated appliance brands have used numerous control boards and overlays that can appear similar. Matching the color alone is not enough to guarantee compatibility.

For example, parts catalogs document this specific overlay as being used with certain electronic control boards, including 316455400, 316455410, 5304518660, and 5304518661, depending on the application. A-1 Appliance

Always locate the appliance model number and compare the original overlay layout before ordering. On many ranges, the model and serial label can be found around the oven door frame, storage drawer area, or another manufacturer-designated location.

Correct model verification helps ensure the button positions, display opening, printed functions, dimensions, and overall layout match your existing range.

12-Month Warranty and USA-Based Support

Wholesale Sensors provides dependable replacement components for household appliances, commercial equipment, refrigeration systems, HVAC equipment, pool and spa systems, automotive applications, and industrial equipment.

The Wholesale Sensors Replacement Frigidaire 316220722 White Control Overlay Panel provides a practical way to restore the appearance and readability of a compatible range, stove, or oven without unnecessarily replacing a working electronic control board.

Every overlay is backed by a strong 12-month warranty and responsive USA-based support, giving homeowners, appliance technicians, landlords, property managers, maintenance teams, and professional appliance repair companies added confidence when servicing compatible Frigidaire, Kenmore, Crosley, Tappan, Electrolux, Gibson, and White-Westinghouse ranges.