Replacement TurboChef CON-3064 RTD Sensor/Probe Kit, 12 Month Warranty & US Based Support

Restore accurate oven temperature monitoring with the Wholesale Sensors Replacement for TurboChef CON-3064 RTD Sensor Kit, backed by a 12-Month Warranty and responsive USA-based product support. Designed for compatible TurboChef commercial high-speed ovens, this replacement RTD sensor provides critical temperature feedback to help the oven control system maintain accurate operating temperatures and consistent cooking performance.

The TurboChef CON-3064 is an RTD sensor and probe service kit used in compatible TurboChef accelerated cooking equipment. Middleby Advantage, the official OEM parts source for TurboChef, identifies CON-3064 as an RTD service kit with Wago connector. Parts Town likewise identifies the component as the TurboChef CON-3064 RTD Sensor/Probe Kit with Wago Connector.

This Wholesale Sensors component is engineered as a perfect OEM-style replacement designed to meet or exceed OEM performance specifications for compatible applications. Verified previous and cross-reference part numbers include HHC-6517-2, HHC-6595, and CON-7263. Parts Town specifically lists these three numbers as previous parts associated with the current CON-3064 service kit.

The RTD, or Resistance Temperature Detector, performs an essential function inside compatible TurboChef ovens. As oven temperature changes, the sensing element produces a predictable change in electrical resistance. The oven’s electronic control system interprets that signal as temperature information. Accurate feedback allows the control system to monitor operating conditions and maintain the temperatures required for reliable high-speed cooking.

TurboChef ovens combine sophisticated electronic controls with rapid cooking technology, making accurate temperature sensing especially important. When the RTD is functioning correctly, the controller receives dependable information about actual oven temperature. When the probe becomes damaged, electrically unstable, disconnected, or inaccurate, the controller may no longer receive the temperature information expected for normal operation.

This replacement is compatible with a broad selection of TurboChef high-speed commercial ovens. Existing application data identifies TurboChef i3, i5, Sota, Bullet, Encore, and Tornado NGC series ovens among the major applications. It is also listed for TurboChef HHC-2020 and HHC-1618 conveyor oven models.

Because TurboChef has manufactured numerous oven configurations and revisions, compatibility should always be verified using the complete model, serial number, and original sensor part number. Do not purchase solely because the equipment carries the TurboChef brand. Similar oven platforms can use different temperature probes, wiring arrangements, controls, or service components.

The CON-3064 replacement is especially useful when servicing equipment that previously used HHC-6517-2, HHC-6595, or CON-7263. These identifiers are documented as previous parts for CON-3064, making them valuable cross-reference numbers when identifying the correct replacement during commercial oven service.

A failing RTD sensor can cause several noticeable operating problems. Potential symptoms include incorrect temperature readings, fluctuating oven temperatures, inconsistent heating, uneven cooking results, abnormal heating cycles, or failure to reach or maintain the expected operating temperature. Depending on the TurboChef controller and oven configuration, RTD-related diagnostic messages may also be displayed.

Existing application information for the CON-3064 replacement specifically associates the sensor with Open RTD and RTD Out of Range faults. These conditions can occur when the control system detects an abnormal signal from the temperature-sensing circuit.

An Open RTD condition can indicate that the controller is no longer detecting the expected electrical path through the RTD circuit. However, the sensor itself is not always the cause. A disconnected terminal, damaged wire, poor connection, or another electrical problem in the circuit may produce similar behavior.

An RTD Out of Range condition can indicate that the temperature-sensing signal is outside the range expected by the control system. This may result from a defective sensor, damaged wiring, poor connections, or another problem affecting the temperature measurement circuit. Proper diagnosis is therefore recommended before replacing the probe.

Unlike automotive components, this commercial oven sensor does not use automotive OBD-II diagnostic trouble codes such as P0117 or P0118. TurboChef ovens use equipment-specific fault messages and diagnostic procedures. Always use the service documentation for the exact oven model when troubleshooting an error.

The CON-3064 service kit incorporates a Wago connector configuration, supporting a secure electrical connection during installation. Both Middleby Advantage and Parts Town identify the Wago connection as part of the CON-3064 service kit configuration.

Installation should be performed carefully because TurboChef commercial ovens contain high-voltage components and can retain significant heat after operation. Before beginning service, disconnect the oven from electrical power and allow it to cool completely. Follow the manufacturer’s service procedure for accessing and replacing the temperature probe.

During removal, note the original RTD probe location, mounting arrangement, wire routing, and electrical connections. Install the replacement sensor in the corresponding position and route its wiring according to the original configuration. Avoid routing the sensor wiring against sharp edges, moving components, or unintended high-temperature surfaces that could damage the insulation.

After installation, verify that all connections are secure before reassembling the oven. Restore power according to the service procedure and perform the appropriate operational or diagnostic test. Confirm that the oven recognizes the RTD input correctly and that temperature readings behave normally as the equipment heats.

If an RTD-related fault remains after sensor replacement, additional troubleshooting may be required. Inspect the wiring harness, Wago connection, electronic control system, and other related components. Replacing a temperature sensor cannot correct an unrelated wiring, controller, heating, airflow, or power-supply problem.

The Wholesale Sensors replacement is built for the demanding conditions encountered in commercial foodservice equipment. TurboChef ovens can experience repeated heating and cooling cycles throughout the business day, so reliable temperature feedback is essential. Each replacement sensor is rigorously tested for electrical response, temperature-sensing performance, fit, and reliability before shipment.

This makes the CON-3064 replacement a practical repair component for restaurants, cafés, convenience stores, institutional kitchens, commercial kitchen service companies, equipment technicians, and other foodservice operations that rely on TurboChef high-speed ovens for consistent production.

Wholesale Sensors specializes in replacement sensing components for commercial foodservice equipment, refrigeration, HVAC systems, appliances, automotive applications, pool and spa equipment, RV systems, and industrial equipment. Our focus is providing dependable aftermarket sensors supported by careful quality testing and knowledgeable customer assistance.

Every Wholesale Sensors Replacement for TurboChef CON-3064 RTD Sensor Kit is backed by a strong 12-Month Warranty and responsive USA-based product support. Whether replacing a failed probe during preventive maintenance or repairing an oven with a diagnosed RTD temperature-sensing problem, this sensor provides a dependable aftermarket solution.

Before ordering, verify the TurboChef model, serial number, original sensor configuration, and part number CON-3064, HHC-6517-2, HHC-6595, or CON-7263. With confirmed compatibility, the Wholesale Sensors replacement provides accurate RTD temperature monitoring, dependable construction, a convenient Wago connector configuration, rigorously tested performance, USA-based support, and the confidence of a 12-month warranty.