Replacement for Bakers Pride AS-1400125, Probe RTD, 12 Month Warranty

Restore accurate temperature monitoring and dependable cooking performance with the Wholesale Sensors Replacement for Bakers Pride AS-1400125 RTD Temperature Probe, backed by a strong 12-Month Warranty and responsive USA-based product support. Designed for compatible Bakers Pride commercial ovens, this replacement probe provides the temperature feedback required by the oven control system to regulate heat and maintain consistent cooking temperatures.

The Bakers Pride AS-1400125 is identified by Bakers Pride and Middleby Advantage as an RTD temperature probe for BCO and GD models. Parts Town likewise identifies AS-1400125 as a temperature probe specifically intended for BCO and GD equipment.

This Wholesale Sensors component is engineered as a perfect OEM-style replacement designed to meet or exceed OEM specifications for compatible applications. The primary manufacturer part number is AS-1400125. Parts Town also catalogs the component as BKPAS-1400125 and identifies BKP1400125 as a previous part number. These references can help technicians and equipment owners identify the correct replacement when comparing older parts records, service documentation, and supplier catalogs.

The AS-1400125 is an RTD, or Resistance Temperature Detector, probe. An RTD senses temperature through a predictable change in electrical resistance. The oven control system monitors that electrical response and uses it to determine the temperature inside the cooking environment.

Accurate temperature information is critical in a commercial oven. The control system must know how actual oven temperature compares with the selected setpoint so it can properly manage heating operation. If temperature feedback is accurate and stable, the oven can maintain more consistent cooking conditions throughout the heating cycle.

This is especially important in commercial kitchens where repeatability matters. Restaurants, bakeries, cafeterias, pizzerias, hotels, schools, hospitals, and institutional kitchens depend on ovens to produce consistent results across repeated batches. Inaccurate temperature feedback can affect cooking times, product consistency, browning, texture, and overall food quality.

The AS-1400125 is specifically documented for compatible Bakers Pride BCO and GD series equipment. Middleby Advantage identifies the part as a BCO/GD RTD probe. The part is also listed directly for the Bakers Pride BCO-G1 and GDCO11G equipment models.

Additional configurations may use the same probe, but commercial cooking equipment can change across production revisions. Voltage, fuel type, serial number, controller configuration, and production date may affect which replacement part is required. For this reason, customers should verify their complete model number, serial number, and original AS-1400125 part number before ordering.

Do not assume that every Bakers Pride convection oven uses this probe. Bakers Pride catalogs other RTD probes, including AS-1400120, as separate components. Similar-looking temperature probes should not automatically be considered interchangeable because their electrical characteristics, physical dimensions, connectors, or intended control systems may differ.

A deteriorated RTD probe can provide inaccurate, intermittent, or unavailable temperature information to the oven controller. Depending on the equipment and nature of the failure, possible symptoms can include incorrect oven temperature, inconsistent heating, overcooked or undercooked food, unusually long preheat times, excessive temperature swings, or abnormal heating cycles.

An oven that appears too hot or too cold does not automatically have a defective AS-1400125 probe. Several other components can affect commercial oven temperature. Heating element or burner problems, relays, contactors, control boards, damaged wiring, poor electrical connections, airflow problems, door sealing issues, and incorrect controller calibration can produce similar symptoms.

Proper diagnosis is therefore recommended before replacing the temperature sensor. Inspect the existing RTD probe and wiring for loose electrical connections, damaged insulation, broken conductors, overheated connectors, corrosion, contamination, or physical damage to the probe.

A qualified technician can also evaluate the RTD electrically. Resistance should respond predictably as probe temperature changes. The measured resistance should be compared with the correct Bakers Pride service specification for the AS-1400125 and the exact equipment configuration.

Do not substitute a different temperature sensor simply because it physically fits. The controller expects a specific electrical response from its RTD. Using a probe with an incorrect resistance characteristic can cause inaccurate temperature readings and improper oven operation.

Installation should begin by disconnecting electrical power to the oven according to Bakers Pride service procedures. Commercial ovens can contain hazardous voltage, high-temperature surfaces, and gas components depending on the model, so qualified commercial foodservice technicians should perform service when required.

Allow the equipment to cool completely before working near the cooking chamber or temperature probe. Locate the original AS-1400125 and document its mounting position, probe orientation, wire routing, and electrical connection before removal.

Carefully disconnect the original probe without pulling directly on its wiring. Inspect the mating connector and surrounding wiring for heat damage or loose terminals. If the wiring or connector is damaged, correct that problem as part of the repair rather than installing a new sensor into a compromised circuit.

Install the replacement probe in the same intended sensing location and orientation. Proper positioning is important because an RTD can only report the temperature at its actual sensing location. Moving the probe closer to a heat source or into a different airflow area can affect the temperature detected by the sensor.

Route the wiring according to the original equipment configuration. Keep wiring protected from sharp metal edges, moving components, and inappropriate contact with hot surfaces. Confirm that all electrical connections are secure before reinstalling covers and restoring power.

After installation, operate the oven according to the manufacturer’s procedure and allow it to complete normal preheating and temperature cycling. Verify temperature performance with appropriate commercial oven testing equipment when required. If temperature problems continue, inspect the controller, heating system, wiring, airflow, and other related components before assuming the replacement probe is defective.

Commercial ovens do not use automotive OBD-II diagnostic trouble codes, so codes such as P0117 or P0118 do not apply to the Bakers Pride AS-1400125. Electronic Bakers Pride equipment may use controller-specific diagnostic information depending on the model. Always consult the service documentation for the exact oven when interpreting a displayed error or temperature-related fault.

The Wholesale Sensors replacement is built around a responsive RTD sensing element and durable application-specific construction for reliable operation in demanding commercial cooking environments. The genuine AS-1400125 is itself identified as an RTD probe designed for accurate temperature sensing in compatible BCO and GD ovens.

Each Wholesale Sensors replacement is rigorously tested for temperature response, electrical continuity, resistance behavior, connection integrity, fit, and reliability before shipment. This quality-control process helps provide stable temperature feedback and dependable performance for compatible Bakers Pride commercial ovens.

Wholesale Sensors specializes in aftermarket temperature sensing and replacement components for commercial foodservice equipment, ovens, refrigeration systems, HVAC equipment, appliances, pool and spa systems, automotive applications, RV equipment, and industrial systems.

Every Wholesale Sensors Replacement for Bakers Pride AS-1400125 RTD Temperature Probe is backed by a strong 12-Month Warranty and responsive USA-based product support. Before ordering, verify your Bakers Pride equipment model, serial number, original probe configuration, and AS-1400125 part number.

With confirmed compatibility, this replacement provides accurate RTD temperature feedback, application-specific fit, rigorously tested performance, dependable construction, and a practical solution for maintaining consistent temperature control in compatible Bakers Pride BCO and GD commercial ovens.